Table of Contents
Advertisement
4.6 Align the device
To reduce noise and vibration and
prevent the device from wandering,
align the device correctly.
Loosen the locknuts clockwise
1.
using a size 17 wrench.
To align the device, turn the device
2.
feet. Check the alignment with a
spirit level.
All device feet must be firmly on
the floor.
Setting up and connectingde
Tighten the lock nuts hand-tight
3.
against the housing using a size 17
wrench.
Hold the device base firmly and
do not adjust its height.
17
Advertisement
Table of Contents
