Table of Contents
Advertisement
Clean the drain pump
Requirement:The drain pump is
empty. → Page 35
Since there may still be residual
1.
water in the drain pump, carefully
unscrew the pump cover.
Coarse dirt can cause the filter
‒
insert to become stuck in the
pump housing. Loosen any dirt
and remove the filter insert.
Clean the interior, the threads of the
2.
pump cover and the pump housing.
The pump cover consists of two
components that can be
dismantled for cleaning.
r
Sure
put that
3.
e
r lye powder
wheel d
leaves.
the wing
turn mpe
Cleaning and carede
Insert the pump cover.
4.
Make sure that the pump cover
‒
components are installed
correctly.
Close the pump cover as far as it
5.
will go.
The handle of the pump cover
must be vertical.
Insert and close the maintenance
6.
flap.
37
Advertisement
Table of Contents
