Table of Contents
Advertisement
1.4 Safe Installation
WARNING - Risk of electric shock!
Improper installations are dangerous.
▶
Only connect and operate the device in accordance with the
information on the nameplate.
▶ Only connect the device to an alternating current power supply
via a properly installed earthed socket.
▶ The protective conductor system of the electrical house
installation must be installed correctly. The installation must
have a sufficiently large cable cross-section.
▶ When using a residual current circuit breaker, only use a type
with the symbol.
▶ Never power the device via an external switching device,
e.g. B. timer or remote control.
▶ When the device is installed, the mains plug of the mains
connection cable must be freely accessible, or if free access is not
possible, an all-pole disconnecting device must be installed in the
fixed electrical installation in accordance with the installation
regulations.
▶ When setting up the device, ensure that the power cable is
not pinched or damaged.
Damaged insulation of the mains connection cable is dangerous.
▶ Never bring the power cord into contact with hot parts of the
device or heat sources.
▶ Never bring the power cord into contact with sharp points or
edges.
▶ Never bend, squeeze or change the power cable.
WARNING - Danger of fire!
Using an extended power cord and unauthorized adapters is
dangerous.
▶ Do not use extension cables or multiple socket strips.
Securityde
5
Advertisement
Table of Contents
