Status 2; Status 3 - Emerson Bettis RTS Installation, Operation And Maintenance Manual

Section 8: Input and Output Data
September 2023
8.3.6

Status 2

Position number: 5
Data format: 16-bit (bit field)
Table 16.
Bit no.
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Parameter P15.9 can be used to set alternative output functions for Status 2.
8.3.7

Status 3

Position number: 6
Data format: 16-bit, error number
Table 17.
Error number
3
4
5
9
11
17
22
Parameter P15.10 can be used to set alternative output functions for Status 3.
18
Installation, Operation and Maintenance Manual
Hex
Structure
Description
Function
Bit= 0
Dig. output 1 -
Dig. output 2 -
Dig. output 3 -
Dig. output 4 -
Dig. output 5 -
Dig. output 6 -
Dig. output 7 -
Dig. output 8 -
Dig. input 1 -
Dig. input 2 -
Dig. input 3 -
Dig. input 4 -
Dig. input 5 -
PHASE SEQUENCE -
FC ERROR -
FAIL-SAFE ERROR -
Hex
Error Number
Meaning
Motor temperature warning
Motor temperature cut-out
Phase sequence error or phase loss
Error in the power supply or the frequency converter
Error in the fail-safe unit (provided there is one)
Fault position sensor
Fault torque sensor (provided there is one)
Bit=1
Corresponding binary output is set
Corresponding binary output is set
Phase sequence error: Error in supply voltage (incorrect phase
sequence, phase loss, total loss, asymmetry)
FC error: Error in the power supply unit and/or the frequency
converter (if there is one)
Fail-safe unit not ready (if there is one)
FCIM-20054-EN Rev. 0
Input and Output Data