Canon ELURA 50 Instruction Manual page 66

ii!i!ilili iiii!iiiiii!ii ==
Sound records/plays back normally.
When operating effects in TAPE CAMERA or CARD CAMERA mode, make
sure the program selector is set to _.
re+m,
Select effect 1
1. Press the D.EFFECTS SELECT button to open the digital effects
menu.
• D.EFFECT ri_, FADER, EFFECT and MULTI_S appear.
2. Select EFFECT.
• The settings appea_: Select the setting by turning the selector dial.
3. Select the desired setting.
• You return to the digital effects menu.
4. Press the D.EFFECTS SELECT button to close the menu.
• The menu disappears and the name of your selected setting flashes in tile
display.
[Effect on/off]
5. If you're in TAPE PLAY (VCR) mode, press the I_ (play) button.
6. Press the D.EFFECTS ON/OFF button.
• The name of your selection stops flashing and takes effect on the display.
• Each time you press tile D.EFFECTS ON/OFF button, the chosen effect is
activated or deactivated.
m+m
1. Press the D.EFFECTS SELECT button.
• BLK&WHT flashes in the display.
2. Press the D.EFFECTS ON/OFF button.
• The effect is activated and tile image appears in black and white.
66