Canon ELURA 50 Instruction Manual page 35

iiii
• Connect ttle camcorder using the STV-250N Stereo Video Cable. Connect t!le
white plug to the white audio terminal L (left). Connect the red plug to the red
audio terminal R (right). Connect the yellow plug to the yellow video terminal
VIDEO.
• tr you are connecting the camcorder to a TV, set the TV/VIDEO selector on the
television to VIDEO.
• tr you are connecting the camcorder to a VCR, set tile input selector oi1 the
VCR to LINE.
[] Notes:
• tr you are going to use t!le tin as a monitor while you are shooting, remember
to keep the TV volume turned down as long as the camcorder"s audio terminals
are connected. If the sound from the TV speakers is picked up by tile
microphone, an unpleasant high_pitched squeal, called feedback, may be
produced.
• For TVs having the Video IDol system:
if you connect tile camera to tt_e TV's S terminal or video in terminal,
recordings made in tile 16:9 mode [or wide screen TVs will automatically play
back in wide screen mode on the TV screen.
-_.B'
35