Advertisement
10. Assy.,
Spindle Motor (M1104)
disassembly
(1) After removal of the Assy., Arm Clamper, move the
Pick-Up Unit (HD1101) toward the arrow direction
by rotating the gear section of the Assy., Sled
Motor (M1103) by your finger.
(2) Remove two screws
) . (See Figure 13)
(3) Can be removed the Assy., Spindie Motor (M1104).
< Assembly notes >
@
Assemble the Assy., Spindle Motor (M1104) by
taking care of the mounting angle as shown in
Figure 13-1.
@
Make wire forming of the Assy., Spindle Motor
(M1104) as shown in Figure 13-2.
Tightening torque :
HE bILZ :
1.25+0.25kg
+ cm
®
Pick-Up Unit (HD1101)
<Figure 13-1>
Assy., Sled Motor
<13-1>
(M1103)
Assy., Spindle Motor
(M1104)
Pick-Up Unit (HD1101)
Assy., Spindle Motor
(M1104)
10. AEL KIL > E—R—HAW
(MII0NO DMA
(1) P-b + FFL IN-#AUENRLEEC.
ALY FOE
—2%—#8%
(M1103)
OF PRBOCHCHAL,
KHMO
AmMtcty7+-PyF-eatyh
(HD101)
eam
LET.
(ISHER)
(2) 2ROAVOEALET.,
(SMBH)
WEE,
AEL EW + E—-R—HAIE
(M1104)
is thn
ET,
< #852 L DiER>
@
ACL
KL - E-—2—FAW
(M1104) it. 13-1 Etc
HEL,
BRU AU ARICERL
THAITTR
SU
@
ACL EW
E-—R-HAY
(MI10ADTT
>
Da-VTls,
13-AMOMICL TFA,
Assy., Drive Unit
Assy., Spindle Motor
(M1104)
Gear Section
<Figure
13 >
<13>
<Figure 13-2 >
<13-21>
FPC Switch P.C.Boad
DS-L
SERIES
Advertisement
