Playing Back Tapes - Sony LBT-D109CD Operating Instructions Manual

Playing Back Tapes
You can use tapes of type | and II for playback.
Playing Deck A or B
4 Press the TAPE SELECT button to select tape
type.
TAPE SELECT
Wn Grom®©)?°
5 Press the & buiton.
= | 2
Playback starts.
Pees | ee } | ees
1 Press the TAPE button.
When the tape is played to the end, the deck stops.
To stop during playback, press the B/& button.
To fast forward or rewind, press the >> or <4 button.
To pause, press the if PAUSE button. To resume, press the
tt PAUSE button again.
To play a tape recorded with the Dolby NR* effect
Set the DOLBY NR switch to ON. The setting is operated on
both decks. This unit is provided with DOLBY B NR system.
When both decks are set to play mode
Only the sound from deck B will be heard.
* Dolby noise reduction manufactured under license from Dolby Laboratories
Licensing Corporation.
"DOLBY"and the double-D symbol 00 are trademarks of Dobly Laboratories
Licensing Corporation.
Playing from Deck to Deck—Relay Play
1 Insert tapes into deck A and B.
2 Press the & button on deck B.
Deck B starts playing.
3 Press the lf PAUSE button and the & button on deck
A.
When the tape in deck B ends, the tape in deck A starts
playing.