Receiving Broadcasts - Sony LBT-D109CD Operating Instructions Manual

Receiving Broadcasts
You can listen to FM and AM stations.
wetdateanen aster: se dimmer 8+ heh
Ce ee ee eee
1 Press the TUNER button.
0
TUNER
2 Press the BAND SELECT button repeatedly until
the desired band appears.
BAND SELECT
I a _|
Each time you press the BAND SELECT button, the
received band changes as follows:
FM ———> AM
3 Keep the DUAL MODE TUNING + or - button
pressed for over 1 second so that "AUTO"
flashes. :
The unit starts scanning frequencies and stops when
it tunes into a station. Repeat this step until the
desired station is tuned in.
DUAL MODE TUNING
4 ——
fy a SBE Oal
When you press the TUNER button
The CD player is automatically turned off so that radio
broadcast may not be disturbed by noise.
For receiving FM stations in stereo
Press the ST/MUTE button so that "MUTING" appears.
If you cannot tune in a desired station
A station with a weak signal may be skipped. In this case,
tune in the station manually.
¢ Press the DUAL MODE TUNING + or - button again to
stop scanning.
¢ Press the DUAL MODE TUNING + or - button repeatedly
and tune in the exact frequency.
When an FM stereo program is noisy or hard to receive
Press the ST/MUTE button so that "MUTING' disappears
from the display. There will be no stereo effect, but the
reception will be improved. Press it again to restore the
stereo effect.
The "TUNED" indication appears
When a station of sufficient signal strength is turied in.
The "STEREO" indication appears
When an FM stereo program of sufficient signal strength is tuned in.