Sony LBT-D109CD Operating Instructions Manual page 14

Tehcelauerctdlolamiel the Display
When you press the & OPEN/CLOSE button to close the
tray, or press the TIME button in stop mode, the display
shows you the following information:
The total number of selections (a)) and the total playing time
of the inserted disc ( b)).
re —=m00)° |
_—7
mV er Ceirr y—
aa ia
id </p> PDI |
a Ss ee e e ae ne eee a te ere Se abe
Each time you press the TIME button during play Locating a Particular Selection
(continuous or program), the display changes to show
you the following information:
You can locate the beginning of a desired selection during
— Remaining time inthe current selection (a).
stop, play or pause mode.
If the current selection number is over 20, "—— .——" is
¢ Keep the I44 << (or i) button pressed to skip selections
(This is operable during the stop mode only, when using
the button on the main unit.)
To locate the beginning of a succeeding selection
¢ Press the >> >PI (or PPI) button as many times as
required.
¢ Keep the >> PI (or PPI) button pressed to skip
selections. (This is operable during the stop mode only,
when using the button on the main unit.)
To locate directly
Press one of the numeric buttons ((77_] to [12]) on the remote
commander to enter the desired selection number.
| Molorchd isle i-m excl adcereitclam ane)ta| @e) am tg [=m BJtctey
To search quickly while monitoring the sound
Keep the >> PPI or 44 <4 button pressed during play, then
release it at the desiréd point.
ie ae aaa
To search quickly while observing the display
Press the If button to pause, then keep the >> PPI or
144 << button pressed. The search speed will increase but
there will be no sound. Watch the display to find the desired
The " na diSC * indication appears point. To resume play, press the > or 0} button at the desired
When there is no disc in the tray. point.
If you press the TIME button during stop The "15 " indication appears
The total time and total number of selections will be displayed. When you reach the end of a disc by continuously pressing
{fa program is stored, the total number of programmed selections will be displayed. the >> PPI button.
Press the 4 <4 (orl¢< )button to return to normal
1 4 indication.