Table of Contents
Advertisement
Dubbing Tapes_
< a
bor ee res
You can dub a tape in deck A onto a tape in deck B.
1 Press the TAPE button.
2 Insert a recorded tape into deck A and a blank
tape into deck B.
F 3 Press the TAPE SELECT button to select tape
type.
Be sure to use tapes of the same type for dubbing, as
the switch setting is effective on both decks.
TAPE SELECT
12
4 Select dubbing speed (NORMAL or HIGH) with the
DUBBING SPEED button.
OUBBING SPEED
5 Press the 8 PAUSE button, then the ® button on
deck A.
6 Press the @ REC button on deck B.
Dubbing starts.
To stop dubbing, press the II/4 button on deck A, then
press the I§/& button on deck B.
You need not designate the Dolby NR system
The tape in deck B is recorded with the same recording level and Dolay NR system as
the original
tape in deck A.
You can listen to other program sources during dubbing
Select the program source with the function selectors.
Advertisement
Table of Contents
