Cisco Firepower 9300 Hardware Installation Manual page 7

Overview
Feature
Supported security
modules
Network module slots
Supported network
modules
Memory
Maximum number of
interfaces
Management port
Serial port
USB port
Pullout asset card
Grounding lug
Description
• SM-24—24-physical core CPU security module (NEBS ready)
• SM-36—36-physical core CPU high performance security module
• SM-40—40-physical core CPU Crypto security module (NEBS ready)
• SM-44—44-physical core CPU high performance security module (NEBS
ready)
• SM-48—48-physical core CPU Crypto security module (NEBS ready)
• SM-56—56-physical core CPU Crypto security module
See Security Modules, on page 13
modules.
Two
Located in the Supervisor
• 8-port 10-Gigabit Ethernet SFP+
• 4-port 40-Gigabit Ethernet QSFP+
• 2-port 100-Gigabit Ethernet QSFP28 (double-wide, occupies both network
module slots)
• 2-port 100-Gigabit Ethernet QSFP28
• 4-port 100-Gigabit Ethernet QSFP28
• 2-port 40-Gigabit Ethernet QSFP+ (built-in) with hardware bypass
• 6-port 10-Gigabit Ethernet SR/LR fiber SFP+ (built-in) with hardware bypass
You can deploy the Firepower 9300 as a dedicated threat sensor with
Note
hardware bypass network modules.
256-GB DDR4 DRAM per security module
Up to twenty-four 10-Gigabit Ethernet (SFP+) interfaces; up to eight 40-Gigabit
Ethernet (QSFP+) interfaces with two network modules; up to eight 100-Gigabit
Ethernet (SFP+) interfaces
One Gigabit Ethernet port on the Supervisor
Supports 1-Gb fiber and copper SFPs
One RJ-45 console
One USB 2.0 Type A
Displays serial number
On rear panel
Cisco Firepower 9300 Hardware Installation Guide
for more information about the security
Features
3