File Format - Olivetti d-Copia 2500MF Advanced Operation Manual

Sending Functions

File Format

2-14
Select the file format of the image to send.
The table below lists the file formats and their details.

File Format

PDF
TIFF
JPEG
High Comp.
PDF *
* Only displayed when the optional PDF Upgrade Kit is installed.
NOTE:
When the color mode in scanning has been selected for
Grayscale or Full Color, you can adjust the image quality Regarding color
mode, refer to Color / Grayscale / Monochrome Selection on page 2-25.
When the optional PDF upgrade kit has been installed, you can use PDF
encryption functions. For details, refer to the following PDF Encryption
Functions.
Use the procedure below to select the file format for transmission.
1
Place the originals on the platen.
2 Press the Send key.
3 Press [Type of Original/Transmission] and then [File Format].
4
Select the file format from [PDF], [TIFF], [JPEG], and [High Comp. PDF].
When the color
mode in scanning
has been selected
for Grayscale or Full
Color, set the image
quality.
If the optional PDF
upgrade kit is
installed, press
[Encryption] and
specify the
encryption settings.
Adjustable range of image
quality
1 Low Quality (High Comp.) to
5 High Quality (Low Comp.)
1 Low Quality (High Comp.) to
5 High Quality (Low Comp.)
1 Low Quality (High Comp.) to
5 High Quality (Low Comp.)
1 Compression Ratio Priority
to 3 Quality Priority
Ready to send.
Place original .
File Format
Press [OK] to display
the image.
Status
ADVANCED OPERATION GUIDE
Color mode
Full Color, Grayscale,
Monochrome
Full Color, Grayscale,
Monochrome
Full Color, Grayscale
Full Color
Image Quality
PDF
Low Quality
(High Comp.)
TIFF
JPEG
High Comp.
PDF
Add Shortcut Cancel
Destination
1
High Quality
( Low Comp.)
Off
Encryption
OK
10/10/2007 10 :10