VocoPro IR-9000 Owner's Manual page 13

Professional infrared dual rechargeable wireless mic system

Table of Contents

Descriptions and Functions cont.

Microphone

1. Power Switch - Turns the microphone's power on and off

2. Power indicator LED - Indicates when the microphone's power is on.

4. IR Transmitter - This lens emits the infrared signal to the sensor on the receiver.

Note: Keep hands away from this part of the microphone, as it may block the

infrared signal.

4. Gain Control - Turn this control clockwise to increase the gain output of the

microphone, turn counter-clockwise to decrease.

5. Signal Hi/Lo Switch - Use this switch to toggle from a "hi" or "lo" signal strength

that will give your microphone signal an extra boost if you would like to extend the

range of the microphone. Note: The high setting will cause more power use and

drain the battery faster than the low setting.

Microphone Charger

1. Charging slots - Place the microphones in these slots to charge.

2. LED charge indicators - indicate the charge level of each microphone. Red indicates that the microphone is

charging and green indicates that the microphone is charged.

�

Table of Contents