Safety Instructions 8. Ventilation - The appliance should be situated so its location does not interfere with its proper ventilation. CAUTION For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the RISK OF SHOCK ventilation slots.
�� To ensure the finest performance, please read this requirements. Modifications not expressly approved by manual carefully. Keep it in a safe place for future Vocopro may void your authority, granted by the FCC, reference. to use this product. �� Install your unit in a cool, dry, clean place - away from ��...
And while you're there don't forget to check out our Club VocoPro for Karaoke news and events, chat rooms, club directories and even a KJ Service directory! We look forward to hearing you sound like a PRO, with VocoPro, the singer’s ultimate choice. FOR YOUR RECORDS Please record the model number and serial number below, for easy reference, in case of loss or theft.
Now itʼs time to consider how you can maximize the fun and excitement your equipment offers. VocoPro and the Electronic Industries Associationʼs Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion and, most importantly, without affecting your sensitive hearing.
Features Features • Operates In The FCC Compliant 600MHz Band • Includes Four UHF Wireless Microphones • Frequency Scan Feature Finds Frequencies With The Least Interference • More Than 150 Wireless Frequencies To Choose From • LCD Display Windows Show Frequency And Other Information •...
Getting Connected Connecting Power 1. Ensure the main power switch on the rear panel is set to OFF. 2. Connect the power adapter to the power input on the rear panel. 3. Plug the power adapter into a power outlet, or a surge protector. NOTE: A surge protector is recommended to protect your equipment from power surges.
Page 9
Getting Connected Connecting Antennas The Antennas receive the UHF wireless signals from the microphones. 1. Attach the antennas to the connectors on the front panel by twisting them clockwise until firmly attached. 2. To disconnect the antennas, twist counter-clockwise. Attaching the Rack Brackets The UHF-5900 comes with detachable rack brackets which allows the unit to be installed in a standard 19 inch rack.
Descriptions and Functions � � � � � � � Module Display Window 1. MUTE Indicator - Shows when this module is in MUTE mode. The module automatically switches to mute mode when its paired microphone is turned OFF. 2. Group and Channel - Displays the group and channel that this module is currently set to. 3.
Page 12
Descriptions and Functions Microphones 1. IR (infrared) Sensor - This sensor receives the infrared signal that is used to set the frequency that the wireless mic will use. This sensor is only used to set the microphone frequency, it does not send or receive audio signal.
Setting up the Microphones Overview The goal is for each of the UHF-5900’s wireless channels to be operating on a frequency free of interference. This can be accomplished two ways 1) automatic frequency selection, and 2) manual frequency selection. We recommend using the automatic method first, as this method will work well for most areas.
Page 14
Setting up the Microphones Setting the Frequencies Automatically Setting the Frequencies Automatically Setting the Frequencies Automatically Setting the Frequencies Automatically Setting the Frequencies Automatically Setting the Frequencies Automatically Setting the Frequencies Automatically Setting the Frequencies Automatically Setting the Frequencies Automatically wireless mics can be set ireless mics can be set to a frequ...
Setting up the Microphones Setting the Frequencies Manually Setting the Frequencies Manually Setting the Frequencies Manually If you are using the UHF-5900 in a area with heavy RF interference, you may have to set the frequencies manually. Before If you are using the UHF-5900 in a area with heavy RF interference, you may have to set the frequencies manually. Before you start selecting frequencies manually, we recommend that you obtain information on your proximity to TV broadcast towers (see page 18).
Page 16
Using the Wireless Mics Microphone Position The UHF-5900 is ideal for close-up vocals and can be held in the hand or mounted on a mic stand. Keep in mind that microphone technique is largely a matter of personal taste, and there is no one “correct” microphone position. Feedback Feedback occurs when the amplified sound from any loudspeaker reenters the sound system through any open microphone and is repeatedly amplified.
Basic Operations Setting Up with Stage Monitors/P.A. System If you will be using the UHF-5900 with stage monitors and/or a P .A. system, try the following: • Place the stage monitor directly in front of the microphone. • Locate the P .A. loudspeakers so that they point away from the rear of the microphone.
After cross-referencing, you find that channel 43 uses the frequency range of 644 to 650 MHz. You would NOT choose a frequency that falls in that range. NOTE: antennaweb.org is a third party website and is not maintained by or affiliated with VocoPro.
Troubleshooting There is no power • Make sure the power adapter cord is firmly connected to the back of the UHF-5900 and to the power outlet. • If using a power strip/surge-protector, make sure that it is plugged in and switched on. •...