VocoPro IR-9000 Owner's Manual page 10

Getting Connected cont.
Connecting the External Infrared Sensor(s)
The IR-9000 can connect up to two external infrared sensors. One is included and a second one can be purchased from
your nearest VocoPro dealer.
1. Connect The RCA end of the sensor to one of the External Sensor Inputs on the rear panel of the reciever unit
2. Position the sensor in a place where there are no barriers between it and the microphones
NOTE: Infrared signals cannot travel through walls or other dense objects, so make sure there is an open path between
each microphone and the IR sensor(s).
IR sensor
IR-9000
rear panel
10