Sonar Fishfinder; Stopping The Transmission Of Sonar Signals; Traditional Sonar View; Split-Frequency Sonar View - Garmin GPSMAP 9 3 Series Owner's Manual

Hide thumbs Also See for GPSMAP 9 3 Series:
Table of Contents

Advertisement

When properly connected to a compatible transducer, your chartplotter can be used as a fishfinder.
For more information about which transducer is best for your needs, go to garmin.com/transducers.
Different sonar views can help you view the fish in the area. The sonar views available vary depending on
the type of transducer and sounder module connected to the chartplotter. For example, you can view certain
Panoptix
sonar screens only if you have a compatible Panoptix transducer connected.
There are four basic styles of sonar views available: a full-screen view, a split-screen view that combines two
or more views, a split-zoom view, and a split-frequency view that displays two different frequencies. You can
customize the settings for each view in the screen. For example, if you are viewing the split-frequency view, you
can separately adjust the gain for each frequency.
If you do not see an arrangement of sonar views to suit your needs, you can create a custom combination
screen
(Creating a New Combination Page,
(Adding a SmartMode Layout,

Stopping the Transmission of Sonar Signals

• To disable the active sonar, from the sonar screen, select Options > Transmit.
• To disable all sonar transmissions, press

Traditional Sonar View

There are several full-screen views available, depending on the transducer that is connected.
The full-screen Traditional sonar view shows a large image of the sonar readings from a transducer. The range
scale along the right side of the screen shows the depth of detected objects as the screen scrolls from the right
to the left.
Depth information
Suspended targets or fish
Bottom of the body of water

Split-Frequency Sonar View

In the split-frequency sonar view, the two sides of the screen show a full-view graph of sonar data of different
frequencies.
NOTE: The split-frequency sonar view requires the use of a dual-frequency transducer.
72

Sonar Fishfinder

page 13). You can also add sonar views to SmartMode layouts
page 13).
, and select Disable All Sonar Trans..
Sonar Fishfinder

Advertisement

Table of Contents
loading

Table of Contents