Selecting The Number Of Engines Shown In Gauges; Customizing The Engines Shown In Gauges; Enabling Status Alarms For Engine Gauges; Enabling Some Engine Gauge Status Alarms - Garmin GPSMAP 9 3 Series Owner's Manual

Selecting the Number of Engines Shown in Gauges

You can show information for up to four engines.
1 From the engine gauges screen, select Options > Installation > Engine Selection > Num. Engines.
2 Select an option:
• Select the number of engines.
• Select Auto Configure to automatically detect the number of engines.

Customizing the Engines Shown in Gauges

Before you can customize how the engines are shown in the gauges, you must manually select the number of
engines (Selecting the Number of Engines Shown in Gauges,
1 From the engine gauges screen, select Options > Installation > Engine Selection > Num. Engines.
2 Select First Engine.
3 Select the engine to display in the first gauge.
4 Repeat for the remaining engine bars.

Enabling Status Alarms for Engine Gauges

You can enable the chartplotter to display engine status alarms.
From the engine gauges screen, select Options > Installation > Status Alarms > On.
When an engine alarms is triggered, a gauge status alarm message appears and the gauge may become red
depending on the type of alarm.

Enabling Some Engine Gauge Status Alarms

1 From the engine gauges screen, select Options > Installation > Status Alarms > Custom.
2 Select one or more engine gauge alarms to turn on or off.
126
page 126).
Gauges and Graphs