Garmin Chartplotter; Surround View Camera System - Garmin GPSMAP 9 3 Series Owner's Manual

Pairing the GC 100 Camera with a Garmin Chartplotter
™
Before you can connect a wireless device to the chartplotter wireless network, you must configure the
chartplotter Wi‑Fi network
1 With the camera within an unobstructed 76 m (250 ft.) of the chartplotter, quickly press
2 On the chartplotter, select
3 Follow the on-screen instructions.
Do not solely rely on this system for vessel docking and operation purposes.
Objects displayed by the cameras may be closer than they appear.
This system is only intended to enhance situational awareness when used properly. If used improperly, you
could become distracted by the display. Failure to pay attention to your surroundings during vessel docking and
operation could cause you to miss obstacles or hazards in or around the water, leading to an accident causing
property damage, personal injury, or death.
The Surround View Camera System is a set of dedicated cameras installed and configured to provide a
complete bird's-eye view of your vessel to easily see your immediate surroundings. You can also view video
feeds from any of the dedicated cameras in the system to help with maneuvering and docking.
The Surround View Camera System is available only on select vessels and is installed in the factory.
To view the surround view camera screen, from the home screen, select Vessel > Surround View.
Item Description
Bird's-eye view
Individual camera
feeds
Selected camera
indicator
Visual bumper
Distance marker
174
(Setting Up the Wi‑Fi Network,
> Communications > Wireless Devices > Garmin Camera > Start.

Surround View Camera System

Information
The bird's-eye view is always shown on the surround view camera screen.
You can include the bird's-eye view as part of a combo with another screen, such
as a chart.
By default, two individual camera feeds are shown on the surround view screen.
You can customize this to show only one camera instead.
You can quickly change which cameras are shown in these feeds.
This indicator shows which camera is shown in the individual camera feed.
You can enable and configure the visual bumper to show a line on the birds-eye
view that can help you judge how close objects are to your boat.
You can enable this feature to help judge distances when maneuvering or
docking.
page 26).
WARNING
three times.
Surround View Camera System