Installation Setting - Panasonic PT-D7500U Operating Instructions Manual

Installation Setting

A projection scheme can be chosen depending on the installation of the projector. If the picture is shown upside
down or in reverse, change the projection scheme using the following figures A to D.
A: Floor mount front projection (Front – Floor mount)
C: Floor mount rear projection (Rear – Floor mount)
Select the setting by displaying the on-screen indications using buttons of the remote control or the control panel on
the main unit.
Procedure of setting
MAIN MENU
PICTURE
POSITION
LANGUAGE
OPTION
TEST PATTERN
SIGNAL LIST
:MENU SELECT
ENTER:SUB MENU
OPTION
ID
SETTING
LAMP1 RUNTIME
LAMP2 RUNTIME
LAMP SELECT
LAMP POWER
LAMP COOLING TIME SHORT
RS232C SETTING
RGB2 SELECT
OSD POSITION
:MENU SELECT
:CHANGE
2
FRONT-F
57h
60h
DUAL
HIGH
RGB1 OUT
1
B: Ceiling mount front projection (Front – Ceiling mount)
D: Ceiling mount rear projection (Rear – Ceiling mount)
Press the "MENU" button.
The MAIN MENU screen will be displayed.
Select "OPTION" with the
buttons.
Press the "ENTER" button.
The OPTION screen will be displayed.
Select "SETTING" with the
buttons and choose a projection
scheme with the
Each time or
projection scheme, together with its indications, are
toggled through a cycle as follows:
FRONT-F
REAR-C
Press the "MENU" button twice.
The on-screen indications disappear and the
normal screen appears again.
buttons.
button is pressed, the types of
FRONT-C
REAR-F
71