How To Change The System Format - Panasonic PT-D7500U Operating Instructions Manual

How to change the system format

Pressing the SYSTEM SELECTOR button on the remote control or the control panel of the main unit allows the
user to make the following changes depending on the currently selected input module.
The name of the selected system such as RGB, YP
disappears automatically.
S video / Video terminal input signal
For the setting of
AUTO1
For the setting of
AUTO2
RGB signal input module
ET-MD95RGB
Video signal input module
ET-MD95VM2
For the setting of
AUTO1
ET-MD95VM2
For the setting of
AUTO2
For the setting of
ET-MD95VM2
YCbCr
Serial digital input module
ET-MD95SD1
ET-MD95SD2
ET-MD95SD3
* "AUTO 1": Selection is automatically made out of NTSC, PAL, SECAM, NTSC4.43 and PAL60.
"AUTO 2": Selection is automatically made out of NTSC, PAL-M and PAL-N.
RGB1/RGB2 terminal input signals
For 720p, 1080i input: RGB
For 480i, 576i, 480p input: RGB
For the signals other than those above, SYSTEM SELECTOR button is invalid.
P and AUTO is displayed on the top left of the screen and
B R
: AUTO1 NTSC
PAL60
: AUTO2 NTSC
PAL-N
: RGB RGB REALITY
RGB RGB REALITY
: AUTO1 NTSC
PAL60
: AUTO2 NTSC
PAL-N
: AUTO 480i
: AUTO 480i
: AUTO 480p
: AUTO 1080/60i
1080/24sF
YP P
B R
YCbCr
PAL SECAM
NTSC4.43
PAL-M
* For 720P and 1080i input
YP P
B R
* For 480i,576i,480P input
YC C
r
b
The SYSTEM SELECTOR button
is ineffective with other types of
signals.
PAL SECAM
* For the details on the setting for
NTSC4.43
AUTO1, AUTO2 or YCbCr, refer to
PAL-M page 68.
* When the STD (standard) button is
576i pressed while changing the system
mode (with the SYSTEM
SELECTOR), the projector
automatically returns to AUTO1,
AUTO2, or AUTO.
576i
480i 576i
1035/60i
1080/25p 1080/30p
720/60p 1080/24p
1080/50i
67