Connecting Signals To The Input Module - Panasonic PT-D7500U Operating Instructions Manual

Installation of input module (optional)

Connecting signals to the input module

When installing the projector, it is necessary to connect signals to the input module in accordance with the
connecting equipment.
Refer to the following diagram to establish proper signal connection.
PC
High-vision video deck
DVD player /
BS digital HD tuner
Video deck
(TBC built-in)
Business
digital VCR
PC
30
RGB signal
I/F
Component signal
Component signal
Video signal input
module ET-MD95VM2
Serial digital input
module ET-MD95SD1
SD signal
Serial digital input
module ET-MD95SD2
SD signal
HD serial digital input
module ET-MD95SD3
SD signal
DVI input module
DVI
ET-MD75DV
signal
Network module
ET-MD75NT
LAN
Signal selector
RS-232C
Output
Input
Input
Input
Output
RGB signal input module
Note
• When switching multiple signals of the
same type and connecting to the same
input module (for example, when using
a signal chosen from multiple high-
vision signals), use a signal selector for
this purpose and connect it with the
projector through RS-232C. Those
signals can be used individually
according to the input terminal on the
signal selector.
• Digital signals cannot be connected to
the signal selector.
RS-232C
Projector
input terminal
ET-MD95RGB