Powering Off The Projector - Panasonic PT-D7500U Operating Instructions Manual

Projection

Powering off the projector

Press the POWER OFF " " button.
Select "EXECUTE" with
and press the ENTER button.
(or press the POWER OFF " " button
again.)
A message "UNDER SHUTDOWN 20 SECONDS"
appears and the projection of the image stops
when the count turns to zero.
(The power indicator lamp of the main unit turns to
orange. The cooling fan keeps running still after
the projection stopped.)
Wait until the power indicator lamp of
the main unit turns to red (i.e., until the
cooling fan stops).
While the cooling fan is still running, never turn off
the MAIN POWER switch, nor unplug the projector
from the outlet.
O " marked side of the MAIN
Press the "
POWER switch to remove all power
from the projector.
40
or button
• Turning on the power supply will not light up the light
source lamp if the lamp is in the process of cooling
down after turning off the power supply. To light up
the lamp, turn on the power supply again when the
lamp has been cooled sufficiently.
• The projector consumes approximately 12 watts of
power even in standby mode after the cooling fan
stops. (Power indicator lamp lit in red)
• If you re-power the projector after shutting off the
main power inadvertently, the projection lamp may
remain unlit. Please turn the power on again after a
while.
AUTO
SETUP
RGB 1 RGB 2 AUX
VIDEO S-VIDEO SHUTTER
LENS
MENU ENTER
Note
POWER
ON OFF
AUTO
SETUP
RGB RGB
AUX
1 2
SHUTTER
S-
VIDEO VIDEO SHUT
MENU FREEZE
UP
PAGE
ENTER
PAGE DOWN
ON SCREEN
1 2 3 SYSTEM
STD OSD
SEL
D.ZOOM
4 FUNC 5 6
1
BRIGHT CONTRAST
7 LENS 8 9
NEXT ASPECT 0 USER
LIGHT ID ALL ID SET
LASER ON/OFF
Computer
Projector
Numetric