Adjusting Contrast / Bright / Color / Tint - Panasonic PT-D7500U Operating Instructions Manual

Adjusting the picture
The desired picture can be obtained by following the procedure below.

Adjusting Contrast / Bright / Color / Tint

Adjustment procedure – to adjust picture (color intensity)
MAIN MENU
PICTURE
POSITION
LANGUAGE
OPTION
TEST PATTERN
SIGNAL LIST
:MENU SELECT
ENTER:SUB MENU
PICTURE
PICTURE MODE
COLOR
TINT
COLOR TEMP.
GAMMA
CONTRAST
BRIGHT
SHARPNESS
NOISE REDUCTION
AI CONTROL
:MENU SELECT
:ADJUST
CONTRAST
Item Operation
Press
CONTRAST
Press
Press
BRIGHT
Press
Press
COLOR
Press
Press
TINT
Press
• If no button is operated for approx. 5 seconds while the individual adjustment screen is displayed, the
Note
screen will return to the "PICTURE" screen.
52
STANDARD
50
30
STANDARD
STANDARD
32
32
6
2
OFF
32
Adjustment
Raises the picture brightness and the picture becomes clearer.
button
Lowers the picture brightness and weakens the picture.
button
Raises the picture brightness.
button
Lowers the picture brightness.
button
Deepens colors.
button
Weakens colors.
button
Adjusts skin tone toward greenish color.
button
Adjusts skin tone toward reddish-purple
button
Press the "MENU" button.
The MAIN MENU screen will be displayed.
Select "PICTURE" with the
buttons.
Press the "ENTER" button.
The PICTURE screen will be displayed.
Select "CONTRAST" with the
buttons.
Press the "ENTER" button.
The CONTRAST individual adjustment screen will
be displayed.
Adjust the level with the
Thu function of the button changes according to
the item as shown in the following table:
Repeat Steps ,
the "BRIGHT", "COLOR" or "TINT".
The individual adjustment screen can be displayed
for "CONTRAST" and BRIGHT" by the remote
control. Refer to the following table:
Adjustment range
Maximum value 63
Minimum value 0
Maximum value 63
Minimum value 0
Maximum value 100
Minimum value 0
Maximum value 60
Minimum value 0
buttons.
and to adjust
Remarks
Use the CONTRAST button
on the remote control.
Use the BRIGHT button on
the remote control.