Samsung SNOW-AAE User Manual page 72

2nd 3rd
Security Remote Management
Secured Protocol
Server Security Status
Network Lock
USB Lock
Certificate Manager
Certificate Manager
General Anynet+ (HDMI-CEC)
Description
You can Allow or Deny external commands to access your product via a network.
Secure the protocol between this device and other devices.
You can view the MagicINFO server information.
Block external network access. You can register networks on the server to allow access.
Block connection to external USB ports.
or WPA Manage the certificates installed on this device.
" Limited supports for Enterprise WPA2 (TLS/TTLS/PEAP) certified models only.
" This function may not be supported depending on the model.
• App Certificate
View and manage the app certificates installed on this device.
Connect a USB flash drive that contains certificates to install them on this device.
• Wi-Fi Certificate
View and manage the Wi-Fi certificates Certificates installed on this device.
" This function may not be supported depending on the model.
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung
product remote control. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure
your Samsung device has this feature, check if there is an Anynet+ logo on it.
" You can only control
" The product remote control may not work under certain conditions. If this occurs, reselect the
" Anynet+ works when the AV device supporting
" Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
Anynet+ devices using the product remote control, not the buttons on the product.
Anynet+ is in the standby or on status.
Anynet+ device.
72