Table of Contents
Advertisement
2nd
3rd
Power and Energy Saving
Brightness Optimization
No Signal Power Off
Auto Power Off
Fan Control
Description
Automatically adjust the picture brightness based on the ambient light level.
" If the screen contrast is not sufficient, set the
" If the
Brightness Optimization
is Off, it may not comply with energy standards.
•
Minimum Brightness
Set the minimum brightness for the signage screen. This function only works if its value is lower than the value set in the
Picture
menu's
Backlight
setting.
" If
Brightness Optimization
is On, the display brightness may change (become slightly darker or brighter) depending on
the surrounding light intensity.
" Available only when
Brightness Optimization
Save power by turning the product off when no signal is received from any source.
" This function may not be supported depending on the model.
" This function does not operate if the display is in the standby mode.
" The product will automatically power off at a specified time. The time can be changed as required.
Choose how long the display will wait before turning off after no user interaction is detected.
Set the speed adjustment mode of the fan inside the product.
Brightness Optimization
to Off.
is set to On.
68
Advertisement
Table of Contents
