Samsung SNOW-AAE User Manual page 56

2nd 3rd
LED HDR
Inverse Tone Mapping
Dynamic Peaking
Eco Image Enhancer
Colour Mapping
Picture Options Colour Tone
Digital Clean View
HDMI Black Level
Film Mode
Auto Motion Plus Settings
Apply Picture Settings
Reset Picture
Description
Set options to provide an optimal HDR effect.
When using multiple S-Boxes, if you set
set the sub functions of LED HDR to Off.
Make the dark elements of the image darker and the bright elements brighter to make the image as realistic as possible.
Enlarge the difference of instantaneous maximum/minimum luminance so that the bright parts can be expressed more
clearly.
Enhance the video quality and reduce power consumption by lowering LED brightness and increasing the gap between the
min/max value of instant brightness.
" Available only when Dynamic Peaking
" Enabled only when connect to supported model.
Map the colour of the specific source image to the colour of the target image in order to convert it to the desired colour.
Select the colour tone that best suits your viewing preferences.
" Settings can be adjusted and stored for each external device connected to an input on the product.
" Available options may vary depending on the product.
Reduce picture noise to avoid distractions such as flickering.
Adjust the black level to optimise the HDMI picture brightness and contrast.
Make frame transitions from older video sources smoother. This function is only available when the input signal is TV, AV,
Component (480i, 1080i), or HDMI (1080i).
Enhance picture sharpness to optimise for fast-moving images.
• Auto Motion Plus
Removes blur and judder from scenes with larger amounts of rapid movement to provide a clearer picture.
The menu names may vary depending on the country.
Apply the picture settings to all external devices connected to the device or to the current source only.
Restore all picture settings to the factory default.
LED HDR to On, the images qualities of the S-Box outputs may differ. To prevent this,
is set to On.
56