Table of Contents
Advertisement
2nd
3rd
Advanced Settings
Colour
Tint (G/R)
White Balance
Gamma
Contrast Enhancer
Black Tone
Flesh Tone
RGB Only Mode
Colour Space Settings
Description
Adjust the colour saturation levels. Colour saturation intensifies as the value nears 100. (Range: 0~100)
Adjust the ratio of green to red tint levels. Increasing values intensifies the saturation of red and green colours. (Range: 0~50)
Adjust the colour temperature of the picture so that white objects appear brighter.
" This function may not be supported depending on the model.
•
2 Point
Adjust red, green, and blue luminosity levels in two sections for precise white balance optimisation.
•
20 Point Settings
Controls the white balance in 20 point interval by adjusting the red, green, and blue brightness.
–
20 Point
Adjust red, green, and blue luminosity levels in twenty sections for precise white balance optimisation.
" Some external devices may not support this function.
Adjust the mid-range brightness of the picture.
•
HLG
/
ST.2084
/
BT.1886
Adjust the HLG, ST.2084,
BT.1886
levels of the picture.
" Available functions may differ depending on the port type.
Automatically balance the contrast to prevent excessive differences between bright and dark areas.
Select the black level to adjust the screen depth.
Adjust the flesh tone colour by increasing or decreasing red levels.
Fine-tune the saturation and tint of the red, green, and blue colour channels.
Configure colour space settings to refine the spectrum of colours on your screen.
•
Colour Space
Choose a colour space.
" To adjust Colour, Red, Green,
Blue
and Reset, set
Colour Space
to Custom.
53
Advertisement
Table of Contents
