Table of Contents
Advertisement
S A F E T Y G U I D E L I N E S
For Your Own Personal Safety, Please Read and Understand This Manual Completely
• Do not shake the device, and avoid using brute force when installing and/or operating.
• To prevent fire and electrical shocks, do not expose this unit to rain or moisture.
• This product is intended for indoor use only.
• Do not use in locations subject to excessive humidity or vibration.
• Product must be grounded.
• Do not allow water, metallic objects, or flammable liquids to enter the unit.
• Use only the original packaging and materials to transport or ship the fixture for service.
Make sure to retain the original packaging for this purpose.
• Be sure that the local power outlet matches the required voltage for the device.
• Do not open up the device for any reason. There are no user serviceable parts inside.
• Disconnect the device's main power when left unused for long periods of time.
• Do not attempt to operate this device if it has been damaged in any way.
• Never operate this device with the cover removed.
• Do not attempt to operate this device if the power cord has been frayed or broken.
• Never force a power cord connector into the fixture. If the power cord or any of its connec-
tors are damaged, replace immediately with a new cord of the same power rating.
• Do not attempt to remove or break off the ground prong from the electrical cord. This prong
is used to reduce the risk of electrical shock and fire in case of an internal short.
• Only handle the power cord by the plug end. Never disconnect the plug by tugging on the
wire portion of the power cord.
• Disconnect from main power before making any type of connection.
• Never block the air ventilation slots. Always be sure to mount this device in an area that will
allow proper ventilation. Allow about 6" (15cm) between this device and a wall.
• Always mount this unit in a safe and stable matter.
• Please route your power cord out of the way of foot traffic. Power cords should be routed
so they are not likely to be walked on or pinched by items placed upon or against them.
• Before performing any servicing, turn off and disconnect the device from power and allow
at least 15 minutes for the device to cool.
• Consistent operational breaks will ensure that this fixture will function properly for many
years.
• In the event of any damage or malfunction, immediately discontinue operation of the
device, disconnect from power, and consult authorized servicer personnel.
• Do not dismantle or modify this unit for any reason.
• The device should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen on, or liquid has been spilled into, the device.
C. The device has been immersed in liquid or exposed to moisture.
D. The appliance does not appear to operate normally or exhibits a marked change in perfor-
mance.
Keep all flammable materials away from this fixture!
Before You Attempt To Install Or Operate This Unit!
7
Advertisement
Table of Contents
