Table of Contents
Advertisement
I N S TA L L AT I O N G U I D E L I N E S
CLAMP MOUNTING
The device can be mounted to a truss by using the clamp mount hole on the top of the
mounting bracket (see illustration below). Insert an M10x20 bolt of the proper weight
rating through both the hole on the mounting clamp and the clamp mount hole, then secure
the clamp and unit together with a matching nut and washer. The clamp can now be used to
secure the unit to the truss in the desired position.
Additionally, a safety cable of the appropriate weight rating (not included) should be
inserted through at least one of the two safety cable attachment points located at each end
of the mounting bracket. The safety cable should then be attached to a secure location.
SAFETY
CABLE
MOUNTING
ATTACHMENT
CLAMP
POINT
CLAMP
MOUNT
HOLE
SAFETY CABLE:
ALWAYS ATTACH A SAFETY CABLE WHENEVER INSTALLING THIS FIXTURE
IN A SUSPENDED ENVIRONMENT TO ENSURE THAT THE FIXTURE WILL
NOT FALL IF THE CLAMP FAILS.
12
Advertisement
Table of Contents
