Table of Contents
Advertisement
I N S TA L L AT I O N G U I D E L I N E S
WALL MOUNTING
The device can be easily wall mounted by using the wall mount holes on the mounting bracket
(see illustration below for locations). Screws of the proper size and weight rating should be
threaded into appropriately rated anchors in the mounting surface (mounting hardware is not
included). The wall mount holes can then be slipped over the protruding heads of the screws,
then the unit can be slid slightly downward in order to lock the screws securely into the
mounting holes. Please note that both wall mount holes must be used to securely install this
device.
Additionally, a safety cable of the appropriate weight rating (not included) should be
inserted through at least one of the two safety cable attachment points located at each end
of the mounting bracket. The safety cable should then be attached to a secure location.
SAFETY
CABLE
ATTACHMENT
WALL MOUNT
POINT
HOLES
SAFETY CABLE:
ALWAYS ATTACH A SAFETY CABLE WHENEVER INSTALLING THIS FIXTURE
IN A SUSPENDED ENVIRONMENT TO ENSURE THAT THE FIXTURE WILL
NOT FALL IF THE CLAMP FAILS.
11
Advertisement
Table of Contents
