Table of Contents
Advertisement
O P E R AT I O N
Dimmer Pack / Switch Pack
1. When the device is in Chase mode, tap MENU until the Segment Display shows "DI" or "SI".
2. Tap UP/DOWN to change between "DI" and "SI".
• If "DI" is selected, the device operates as a dimmer pack. The intensity of each of four
channels can be adjusted, and the programs will fade in or fade out if Chase effect is
active.
• If "SI" is selected, the device operates as a switch pack. Outputs can only be switched
on or off, and the programs will chase instantly.
1Ch/2Ch/4Ch Dimmer Pack:
1. When the device is in Chase mode, tap MENU until the display screen shows channel
output mode. This mode allows you to set your dimmer pack to function as a 1, 2, or 4
channel DMX dimmer pack.
2. Tap the Up or Down button to change between 1ch, 2ch, and 4ch.
• [1ch]: all four channel output is controlled by the first DMX channel.
• [2ch]: channel one and two are controlled by one DMX channel; channel three and four
are controlled by the second DMX channel.
• [4ch]: each of the four channels is controlled by its own DMX channel.
Channel Dimmer Limit:
When the device is in Chase mode, tap MENU until the display screen shows channel dimmer
limit. The DMX LED will be off or flashing.
1. Tap UP/DOWN to adjust the value between 000-100. This defines the dimmer's maximum
limit.
2. Repeat until maximum dimmer limits have been set for each of the four channels.
18
Advertisement
Table of Contents
