Table of Contents
Advertisement
O P E R AT I O N
1Ch/2Ch/4Ch Dimmer Pack:
1. When the device is in Receive mode, tap MENU until the display screen shows channel
output mode. This mode allows you to set your dimmer pack to function as a 1, 2, or 4
channel DMX dimmer pack.
2. Tap the Up or Down button to change between 1ch, 2ch, and 4ch.
• [1ch]: all four channel output is controlled by the first DMX channel.
• [2ch]: channel one and two are controlled by one DMX channel; channel three and four
are controlled by the second DMX channel.
• [4ch]: each of the four channels is controlled by its own DMX channel.
DMX Fail Mode:
1. When the device is in Receive mode, tap MENU until the display screen shows HOLD/OFF/
ON. DMX fail mode defines how the device will behave when DMX signal is interrupted or
lost.
2. Tap UP/DOWN to change between HOLD, OFF and ON.
• [HOLD]: the last DMX setting is held in the outputs.
• [OFF]: output is switch off.
• [ON]: output is full on.
Channel DMX Address:
1. When the device is in Receive mode, tap MENU until the display screen shows the DMX
address, and the DMX LED lights up.
2. Tap UP/DOWN to select DMX address. Options range from 001-512.
3. Repeat steps 1 and 2 until each of the four channels has a DMX address.
Channel Dimmer Limit:
When the device is in Receive mode, tap MENU until the display screen shows channel dimmer
limit. The DMX LED will be off or flashing.
1. Tap UP/DOWN to adjust the value between 000-100. This defines the dimmer's maximum
limit.
2. Repeat until maximum dimmer limits have been set for each of the four channels.
16
Advertisement
Table of Contents
