Power Supply - Vivitar Vivicam 3330 Quick Start Manual

3-3 Power Supply

●Slide the lens cover toward left gently and turn on the camera
after two beeps sound.
●Slide the lens cover toward right gently and turn off the camera.
●Using the lens cover located on the front of the camera to turn
on/off camera. After turn on the camera, the red LED will be
blinking, and then the last image recorded appears on the LCD
monitor.
※If no operation is carried out for a fixed amount of time
(default: about 1 minute), the power is turned OFF to
prevent battery wear. This is called "Auto Power OFF".
You can press the "Mode Display Button" to restart the camera.
※The following features will automatically save the
configuration before turn off the camera unless you ever
selected "Reset Default" to restore its factory anticipated
settings.
1.Resolution
2.Quality
3.OSD Language
4.White Balance
5.EV Compensation
6.TV-Out
7.Light Frequency
8.PC Mode
8