Tv-Out Operation - Vivitar Vivicam 3330 Quick Start Manual

6-6 TV-Out Operation

Using the TV-Out function offered by the camera, you can
transfer the images to the other display devices, e.g. TV or
computer. To transfer the images, perform the following:
1. Please select the correct video type for the connected device
before transferring images. Turn the Mode Dial
Mode and then select correct video output types for your
selection: NTSC or PAL.
2. Please process this function; please use the video cable
provided with the camera to connect the camera and output
device.
3. You can turn on the camera. There will no images shown on
the LCD Monitor. All the images and information will shown on
the output device's display via the video output cable.
You can perform the camera normally when enable the TV-Out
function. The only difference is the location to show the images,
and image information will be form LCD Monitor to video
output device's display.
While using the camera, after you connect the video cable to
the camera, the images will be no longer shown on the LCD
Monitor. If you want to restore the display status on the LCD
Monitor, please disconnect the video cable from the camera.
to Setup
23