Chapter 6 Getting Started; Setup Mode; Record Mode - Vivitar Vivicam 3330 Quick Start Manual

Chapter 6 Getting Started

6-1 Setup Mode

By using the Setup Mode, you can adjust the basic camera
functions, including: Image Size, Image Quality, Self-timer,
White Balance, EV Compensation, OSD Language, Date/Time,
Preset Settings, Format Media, and TV-Out items. To setup
these items, perform the following:
1. Turn the Mode Dial
2. Using the lens cover located on the front of the camera to
turn on/off camera. After turn on the camera, the red LED
will be blinking, and then the setting up screen will shown
on the LCD monitor.
3. By pressing the arrow button
MENU/ENTER Button
items.
4. By pressing the arrow button
Button to enter the selected menu items.
5. By pressing the arrow button
Button to return the previous menu.
to Setup Mode .
/ on the
to move and select the menu
on the MENU/ENTER
on the MENU/ENTER

6-2 Record Mode

Record Mode offers you a quick and easy way to take the ideal
pictures you want.
1. Turn the Mode Dial
2. Using the lens cover located on the front of the camera to turn
on/off camera. After turn on the camera, and then the last
image recorded appears on the LCD monitor.
3. Press and hold the Shutter button down half way to focus the
objects. The camera will process metering and a yellow "[ ]"
will appears in the center position of LCD monitor. Press and
hold the Shutter button continually and it will keep the
metering value. Press the Shutter button down fully and
release the Shutter button. Then you will hear two beeps
sound and take a picture completely.
4. When taking a picture, you can press the Flash Button
to set the desired flash modes: Auto, Red-eye reduction, and
Off.
5. Press the Mode Display Button
favorite LCD display and there are five display modes:
Standard Display, Full Display, Image Only, LCD Monitor Off,
Only Operation Settings.
20
to Record Mode .
to choose your