Sony DAV-HDX265 Operating Instructions Manual page 77

0.0 - 7.0 m2)/_
[SUBWOOFER] Sel lhis between 6.0 dB and
+2,0 dB
+6.//dB.
• [LEVEL (SURROUND)]
You can vary the level of surround speakers as
lbllows. Be sure to set ]TEST TONE] to [ONI
{klr easy adjustment.
[L/R]
0,0 dB
(appears when you
set ISURROUND]
to [YES] in the
[CONNECTION]
setting.)
Set Ihis between 6.0 dB and
+6.0 dB.
Be sure to change tile value in the Setup Display
when you move the speakers.
[L/R]
Surround speakers distance
:3,0 m/10 ft I) can be moved up to 5.0 meters
/appears when you 116 fl) closer to the listening
set [SURROUND] to position from the front speaker
IYESI in file distance.
[CONNECTION]
setting.)
l)When you perform Ihe Quick Setup (page 15)_ the
defaull settings are changed.
:/0.0 o 6.9 meters for North American models.
• If all front and surround spe ikers are not placed at all
equal distance from your listening position_ set the
distance according to the closest speaker.
• Do not place the surround speakers farther away from
your listening position than the front speakers.
• Depending on the input stream, the [DISTANCE]
setting may not be effective.
• [LEVEL (FRONT)]
You can vary tile level of front speakers as
lollows. Be sure to set [TEST TONE] to
[ONI
for easy adjustment.
[L!R] Set this between 6.0 dB and
0.0 dB 0.0 dB.
[CENTER]
Set this between 6.0 dB and
0,0 dB +6.0 dB.
(appears when you
set ICENTERIto
[YESI ill the
[CONNECTIONI
setting.)
To adjust the volume of all the
speakers at one time
Turn tile VOLUME control on tile unit, or press
VOLUME +/- on tile remote.
• [TEST TONE]
The speakers will emit a test tone to adjust
[LEVEL (FRONT)] and ILEVEL
(SURROUND) I.
[OFF]
[ON]
The test tone is not emitted from the
speakers.
The test tone is emitted from each speaker
in sequence while a_liusting level. When
you select one of the [SPEAKER SETUPI
items, the test tone is emitted from each
speaker ill sequence.
Adjusting the speaker level by
using the test tone
1
Press O DISPLAY when the system is
in stop mode.
Tile Control Menu display appears.
2 Press ,I,/4, to select [SETUP],
then press @.
The options l\_r [SETUP] appear.
3
Press 4"14, to select [CUSTOM], then
press @.
Tile Setup Display appears.
4
Press 4"/,I, repeatedly to select
[SPEAKER SETUP], then press @ or
-).
}>
D.
<
3
o
CO
O.
Q.
&
3
continued_
77G8