Changing The Color System - Sony DAV-HDX265 Operating Instructions Manual

To connect the FM wire antenna (aerial)
FM wire antenna (aerial)
(supplied)
_ cor_ FM 75 _ COAXIAL jack
or
FM wire antenna (aerial)
(supplied)
,¢_ FM 75 _:_ COAXIAL jack
m
•Be sure te IMly exlend Ihe FM wire anlenna (aerial).
• After connecting Ihe FM _.x, rireantenna (aerial), keel) it as horizontal as pessible.
• If you have peer FM reception, use a 75-ehm coaxial cable (nel supplied) te connect the unil le an outdoor FM
antenna (aerial) as sll()_.x,'[] below.
Unit
'_Outdoor FM antenna (aerial)
@ Connecting the AC power cord (mains lead)
Before connecling the AC power cord (mains lead) of Ihis unit to a wall outlet (mains), connect the
speakers tolheunit.
Changing the color system (PAL or NTSC)
(Asian, Australian, and Middle Eastern models only)
Depending on the TV to be connected, you may be required to select either PAL or NTSC lor the color
system.
The initial setting of the system lor Australian and Middle Eastern models is PAL.
The initial setting of the system for Asian models is NTSC.
To change the color system
1
Turn off the system by pressing I/_.
2 Turn on the system by pressing I/_ while pressing II on the unit.
Each time you perR_rm this operation, the color system toggles between PAL and NTSC.
"NTSC" lights up in the front panel display when the color system is set to NTSC.
13G8