Sony DAV-HDX265 Operating Instructions Manual page 73

[16:9]
[4:3 LETTER BOX]
[4:3 PAN SCAN]
m
• Depending on the DVD, [4:3 LETTER BOX] may be
selected autonlatically instead of [4:3 PAN SCAN] or
vice versa.
• [YCBCR/RGB (HDMI)]
Selects the type of HDMI signal output fl'om
HDMI OUT jack.
[YCBCR] Outputs YCBCR signals.
[RGB]
Outputs RGB signals.
m
• If the playback picture becomes distorted, set
[YCBCR] to [RGB].
• If the HDMI OUT jack is connected to equipment
with a DVI jack, [RGB] signals will be automatically
output even when you select IYCBCR].
• [COLOR SYSTEM (VIDEO CD)]
(Asian, Australian, and Middle Eastern
models only)
Select the color system when you play a VIDEO
CD.
[AUTO]
Outputs the video signal in the
system of the disc, either PAL or
NTSC. If your TV uses a DUAL
system, select [AUTO].
[PAL] Changes the video signal of an
NTSC disc and outputs it in the
PAL system.
[NTSC] Changes the video signal of a PAL
disc and outputs it in the NTSC
system.
m
• You cannot change the color system of the disc itself.
• You can change the color system of this system
according to the connected TV (page 13).
• [SCREEN SAVER]
The screen saver image appears when you leave
the system in pause or stop mode
R_r 15 minutes.
or when you
play
back a CD. DATA CD
(MP3
audio),
or DATA DVD
(MP3 audio)
lk_r more
than 15 minutes. The screen saver will
help
prevent your display device from becoming
damaged (ghosting). Press any button (e.g., [2:>
button) to cancel the screen saver.
[O_] Turns on die screen saver.
[OFF] Turns off the screen saver.
• [BACKGROUND]
Selects the background color or picture on the
TV screen in stop mode or while playing a CD,
DATA CD (MP3 audio), or DATA DVD (MP3
audio).
[JACKET
PICTURE]
[GRAPHICS]
[BLUE]
[BLACK]
The jacket picture (still picturc/
appears, but only when the jacket
picture is already recorded on the
disc (CD-EXTRA, etc.). If the
disc does not contain a jacket
picture, the [GRAPHICS] picture
appears.
A preset picture stored in Ihe
system appears.
The background color is blue.
The background color is black.
• [BLACK LEVEL]
(North American, Mexican, and Latin
American models only)
Selects the black level (setup level) l\w the video
signals output li'om the jacks other than
COMPONENT VIDEO OUT/HDMI OUT.
[ON] Sets the black level of the output
signal to the standard level.
[OFF] Lowers the standard black level.
Use this when the picture becomes
too white.
<
o
@
o.
o,.
&
e-
3
continued_
73G8