Table of Contents
Advertisement
I
VCR
OPERATIONS
I
Using
the
Tape
Counter
The tape counter:
Indicates the elapsed time in the play and record modes (hours, minutes and seconds).
Is reset when a cassette is inserted in the DVD-VCR.
Allows you to easily find the beginning of a sequence.
If the remaining time is to be calculated correctly, you must indicate the type of cassette being used.
when you want to set the
tape counter to zero
2
When you are ready.
- Start playback or recording.
- Press the [] (Stop) button.
- To fast-forward or rewind to
the sequence at which the
counter was set to zero. press
the theb,¢,4/_ (Forward_or
1_4/_,_ (Rewind) buttons on
the remote control
- Some DVD-VCR information, such as the counter, can be
displayed on the te ewsion screen.
Pressthe INFO. button:
- Onceto display the current function, recording speed and
counter.
- Twice to display the counter only.
- Three times to display the time remaining on the cassette.
- Four times to clear the display
ENG-69
Advertisement
Table of Contents
