Connecting To A Tv (Video) - Samsung DVD-V9700 Instruction Manual

I
CONNECTIONS
I
Connecting to a TV (Video)
Using video/audio cables, connect the VIDEO
(yellow)/AUDlO (red and white) OUT jacks on
the rear of the DVD-VCR to the VIDEO
(yellow)/AUDlO (red and white) IN jacks of your
TV.
2
Turn on the DVD-VCR and TV.
3
Pressthe input selector on your TV remote
control until the Video signal from the DVD-VCR
appears on the TV screen.
® ® ®
Yellow
Video Cable
1 _" _
AudioCable
I v,oEo,NS
Notes
Noise may be generated if the audio cable is placed too close to the power cable.
If you want to connect to an Amplifier, please refer to the Amplifier connection page.
(See pages 19 to 20).
The number and position of jacks may vary depending on your TV set. Please refer to the user's manual of
your TV.
If there is one audio input jack on the TV, connect it to the LINE OUT AUDIO OUT Left (white) jack of the
DVD-VCR.
If you press the P.SCAN button when DVD-VCR is in Stop mode or no disc is inserted, the Video Out mode
changes in the following sequence: (I-SCAN, P-SCAN, Composite)
When you connect an external device (STB or VCR) and play it through the LINE IN 1 jack of the DVD-VCR,
you can still see the display on your TV set although the DVD-VCR set has been turned off.
ENG-18