Table of Contents
Advertisement
I
CONNECTIONS
I
Connection
to a TV
The following shows examples of connections commonly used to connect the DVD-VCR with a TV and other
components.
Connecting
to
a TV
with
an
HDMI
Jack
Using ar HDMI-HDMI cable, connect the HDIVil
OUT jack on the rear ot the DVD player to the
HDMI IN jack of your TV.
/
•
Pressthe input selector on your TV remote
control until the HDMI signal from the DVD player
appears on your TV screen.
HDMI VIDEO Specifications
When you press the HDMI button on the front panel, 480p, 720p, and 1080i are selected in order.
The first press of the HDMI button on the front panel brings up the current resolution.
The second press allows you to change the HDMI output resolution.
- Depending on your TV, certain HDMI output resolutions may not work.
- Please refer to the user's manual of your TV.
- When using an HDMI connection, the DVD player's output is set to HDMI within 10 seconds.
- For better picture quality, set the HDMI output resolution to 720p or 1080i (see page 56).
ENG-14
Advertisement
Table of Contents
