Electrolux EKS985X User Manual page 21

7.14 Setting the clock functions
When you use the core
temperature sensor, the
functions Duration and End
do not operate.
You can change the time and date when
you touch the clock on the display, when
the oven is turned on.
1. Go to menu: Heating Functions.
2. Set the heating function and the
temperature.
3. Press or go to the menu: Timers.
Menu item
Lamp On / Off
Child Lock On / Off
Screen Lock
Heat + Hold
Set + Go
7.16 Heat + Hold
The function keeps prepared food warm
at 80 °C for 30 minutes. It turns on after
the baking or roasting procedure ends.
The function does not work with low
temperature cooking, weight automatic
programmes, steam automatic
programmes, all functions from the
menu: Specials, steam functions from the
menu: Heating Functions.
Conditions for the function:
4. Choose a clock function.
5. Scroll the list to set the necessary
time. Wait a few seconds for the time
to set itself automatically or touch to
confirm: h or min. You can delete the
settings if you touch: x.
When the clock function ends, an
acoustic signal sounds and a message
comes on the display. You can stop or
extend the cooking process.
7.15 Submenu for: Options
Further individual settings related to
safety, convenience and oven lamp.
Description
Switch the oven lamp on or off.
Once activated it locks the screen and all but‐
tons. They remain locked both in ON and OFF
positions. To unlock touch the display and fol‐
low instructions. If unlocked you need to lock it
again via menu.
Screen lock temporarily 'locks' the touch screen
and all buttons except the power key. To unlock
touch the display and follow instructions.
Heat + Hold is only available when a duration is
set. The oven will not completely switch off au‐
tomatically but keep the food warm for 30 mi‐
nutes. It is not available for all programmes. If
active, an icon is shown on the display.
Set+Go lets you set an oven function with dura‐
tion to use it later by only touching the screen.
The screen lock is active when the cooking
process starts.
The function is visible in the menu only when
the duration is set.
• You set the heating function or an
automatic programme.
• The set temperature is more than 80
°C.
• You set the function: Set Duration.
• You turns on the function: Heat +
Hold in the menu: Options.
• The display shows:
If you use the core
temperature sensor, the
symbol is not visible in
the display.
ENGLISH 21
.