Table of Contents
Advertisement
24H
ILLEGAL FIELD INCOMMAND DESCRIPTOR
Indicates that one or more of the reserved bits in the Command
Descriptor was set, or that an option was selected that is not
supported by the CDD522. The Field Pointer and possibly the Bit
Pointer will indicate which field was improperly set.
(Sense Key: ILLEGAL REQUEST).
25H
INVALID LUN
Indicates that the Logical Unit Field of the Command Descriptor was
non-zero. The drive supports Logical Unit zero only.
(Sense Key: ILLEGAL REQUEST).
26H
INVALID FIELD PARAMETER LIST
' Indicates that the parameter list contained one or more reserved
bits set to 1,or that.an option was set not supported by the CDD522.
The Field Pointer and possible the Bit Pointer contain
additional information as to which bit(s) were improperly set.
(Sense Key: ILLEGAL REQUEST).
28H
MEDIUM CHANGED
Indicates that the disc may have been changed since the last
command issued by this initiator.
(Sense Key: UNIT ATTENTION).
29H
POWER-ON RESET OR BUS-RESET OCCURRED
Indicates that a power-on reset or a bus-reset has occurred since
the last command issued by this initiator.
(Sense Key: UNIT ATTENTION).
30H
CANNOT READ MEDIUM UNKNOWN FORMAT
Indicates that the drive couldn't read the information from the device
or medium necessary to execute the current command.(Sense
Key:NOT READY)
2CH COMMAND SEQUENCE ERROR
Indicates that the previous command
is not allowed in the
sequence.
(Sense Key: ILLEGAL REQUEST).
31H
MEDIUM FORMAT CORRUPTED
Indicates that the drive couldn't read (write) the requested
information from (to) disc due to a corrupted or unknown format.
(Sense Key: MEDIUM ERROR).
34H ABSORPTION CONTROL ERROR
Indicates that the laser power has clipped during reading. This is
caused by dust or a scratch on the disc. This warning means: it's
not necessary that the recorded data is damaged.
(Sense key: MEDIUM ERROR).
3AH MEDIUM NOT PRESENT
Indicates that no disc is mounted in the drive.
(Sense key: NOT READY).
Advertisement
Chapters
Table of Contents
