Calibration_Area_Full; Barcode_Available; Barcode_Reading_Error; Recovery_Needed - Philips CDD522 Operating Instructions Manual

B4H CALIBRATION AREA FULL
Indicates. that the Calibration area is full. This means that no
further write.can be performed on this disc.
(Sense key: VOLUME OVERFLOW).
B5H DUMMY BLOCKS ADDED.
Indicates that during writing dummy blocks are added to meet the
disc specification. Dummy blocks will be added if to few (host)
blocks are received for that track.
(Sense key : ILLEGAL REQUEST).
B6H BLOCK SIZE FORMAT CONFLICT.
Indicates that during writing a block (with subheader) was received
and a conflict was detected between the form bit (in subheader) and
the block size.
(Sense key : ILLEGAL REQUEST).
COH NO BARCODE AVAILABLE.
Indicates no barcode present on disc.
(Sense key : ILLEGAL REQUEST).
C1H BARCODE READING ERROR.
Indicates that an error occurred during barcode reading.
(Sense key : MEDIUM ERROR).
DOH RECOVERY NEEDED.
Indicates that the CDD522/10 detected during power up that the
device was writing during the last power down. The medium format
could be corrupted. Its recommended to issue the RECOVER
command.
(Sense key : VENDOR SPECIFIC).
D1H CAN'T RECOVER FROM TRACK.
Indicates that the recovering from a corrupted nee failed
(Sense Key: MEDIUM: ERROR).
D2H CAN'T RECOVER FROM PROGRAM MEMORY AREA.
Indicates that the recovering from a corrupted Program Memory
Area failed.
(Sense Key: MEDIUM ERROR).
D3H CAN'T RECOVER FROM LEADIN AREA.
Indicates that the recovering from a corrupted Leadin Area failed.
(Sense Key: MEDIUM ERROR).
D4H CAN'T RECOVER FROM LEADOUT AREA.
Indicates that the recovering from a corrupted Leadout Area failed.
(Sense Key: MEDIUM ERROR).