Operating/Testing Your Cd-Recordable System; Switching On; Loading And Unloading A Disc; Switching Off 0.2 - Philips CDD522 Operating Instructions Manual

OPERATING/TESTING
YOUR CD-RECORDABLE SYSTEM
Switching on
When you have successfully installed the drive and established
all connections, it is now time to switch on the host and the
CDD522 drive. Power button is on the right side (see flap FIG.1
item 5 rear view) of the drive.
Loading and unloading a disc
Follow the instructions below. (see flap Fig.2)
1.To open the tray: Press the Open/Close key (2).
2.Load a (CD-R) disc, with the label facing upwards.
The tray accommodates discs with 8cm diameter (CD-
Single) or the more usual 12cm discs.
3.To close the tray, either push gently at the front of the tray
or press the Open/Close key (2).
Note: for best results, use only empty discs qualified by Philips.
Switching off
Do not switch off the drive after a successful write : either fixate
the disc or eject it, else an incompatible disc is made.