Table of Contents
Advertisement
116
V
P
ISIONEER
ATRIOT
470 (S
XP 470) S
TROBE
CANNER
5. Click Preview to preview the image before scanning. The image is
displayed on the right side of the window.
Note: If you preview when scanning a stack of documents, the first
page of the stack feeds through the ADF for the preview. After
adjusting the scanner settings, replace that page on the stack so it is
scanned with the rest of the pages.
6. Adjust settings of the previewed image as desired:
Change the button selection for the type of image.
■
Adjust the custom settings; refer to the next section, "Fine
■
Tuning Your Scans".
Change the size of the scanned image. To do this, click and hold
■
the mouse pointer over one of the four sizing-boxes on the
corners of the previewed image. Then drag the box to increase or
decrease the size of the image.
7. Preview the image again. When you are satisfied with the image,
click the Scan button.
8. The scanned images will appear in Microsoft Paint (or other
TWAIN application you're using).
U
'
G
SER
S
UIDE
Advertisement
Table of Contents
Troubleshooting
