Installation And Connection; Environmental Concerns - IKEA TILLREDA Manual

ENGLISH
6. INSTALLATION AND
CONNECTION
Countertop Installation
Remove all packing material and
accessories. Examine the oven
for any damage such as dents
or broken door. Do not install if
oven is damaged.
Cabinet: Remove any protective
film found on the microwave
oven cabinet surface.
Do not remove the light brown
Mica cover that is attached to
the oven cavity to protect the
magnetron.
Installation
1. Select a level surface that
provide enough open space
for the intake and/or outlet
vents.
8 0 m m
(1) The rear surface of
appliance shall be placed
against a wall. Leave a
minimum clearance of
11.5 cm above the oven,
a minimum clearance of
8 cm is required between
the oven and any adjacent
walls.
(2) Do not remove the legs
from the bottom of the
oven.
26
1 5 0 m m
8 0 m m
(3) Blocking the intake and/
or outlet openings can
damage the oven.
(4) Place the oven as far
away from radios and TV
as possible. Operation of
microwave oven may cause
interference to your radio
or TV reception.
2. Plug your oven into a standard
household outlet. Be sure the
voltage and the frequency is
the same as the voltage and
the frequency on the rating
label.
WARNING: Do not install oven
over a range cooktop or other
heat-producing appliance. If
installed near or over a heat
source, the oven could be
damaged and the warranty
would be void.
The accessible surface may be
hot during operation.
7. ENVIRONMENTAL
CONCERNS
According to Waste of Electrical and
Electronic Equipment (WEEE) directive,
WEEE should be separately collected
and treated. If at any time in future
you need to dispose of this product
please do NOT dispose of this product
with household waste. Please send
this product to WEEE collecting points
where available.