Checking A Scanner Connected To A Parallel Port - Visioneer 6200 Installation Manual

16 V 6200/6400 S I G
ISIONEER CANNER NSTALLATION UIDE
C S C P P
HECKING A CANNER ONNECTED TO A ARALLEL ORT
When you connect the 6400 scanner to a parallel port, the scanner icon
appears in the Windows taskbar (at the bottom right corner of the
computer screen). If the scanner is properly connected, the scanner icon
looks like the one in this figure.
Scanner Icon
If the icon has a red X through it, the scanner is not properly connected.
See the section, "If the Scanner Is Not Properly Connected" on page 19
for the steps to fix the problem.
To check the status of the scanner:
1. Place the mouse pointer on the scanner icon in the Windows
taskbar.
2. Right-click the icon. The shortcut menu appears.