Table of Contents
Advertisement
38
V
6200/6400 S
ISIONEER
I
CANNER
NSTALLATION
lamp's life. Click in the box and enter the number of minutes
for the lamp to remain idle before turning off. If you scan when
the lamp is off, it warms up before scanning resumes.
On System Standby/Shutdown—Select this option to turn off
the lamp when you turn off your computer, or when the
computer's energy saver option automatically puts the computer
into standby mode.
Folder for Temporary Images—Click the Folder button and then
select a folder for the scanner's temporary images. During scanning,
a temporary file contains scan information about the image.
Because temporary image files can sometimes be large, select a
folder that has sufficient disk space available.
4. Click OK.
C
L
HANGING THE
In most cases, you select the destination application within the
OneTouch software; however, if your scanner is connected to a USB
port, Scanners and Cameras in the Control Panel shows to which
application the scanner is linked. If you want to select a different
application, use the Events tab in the Scanners and Cameras dialog box.
The following procedure shows how to link the OneTouch software to
another application using the Scanners and Cameras Properties dialog
box.
To select a different application:
1. In Windows, click Start, and then Settings. Click Control Panel.
2. Double-click Scanners and Cameras.
The Scanners and Cameras Properties dialog box appears.
3. Click the Properties button.
4. Click the Events tab.
G
UIDE
A
INKED
PPLICATION
Advertisement
Table of Contents
